The B.E.P. makes the difference! |
|
U.S. Patent No. 5,551,306 |
|
The B.E.P. eliminates grounding problems and |
|
High accuracy, no grounding rings, and the lowest cost are just a few of the features in the latest technology magnetic flowmeters-- the B.E.P. These are velocity meters that measure conductive liquids. The obstructionless flow tube allows you to measure liquids with suspended solids, slurries, even abrasive or corrosive liquids. The conductivity of the liquid may be as low as 3 microsiemens and the process viscosity, pressure, or density has no effect on the accuracy of the meter. The features of the B.E.P. Meters are provided by the latest technology which is a combination of a balanced electrode plane and a liner magnetic field. You will be pleased with the product, the features, and the price. |
Shown is the interrelationship between the magnetic |
Features
|
What is the B.E.P.? How is it different?B.E.P. stands for Balanced Electrode Plane-- the latest technology in mag flowmeters, for which patent applications have been filed. In the B.E.P. design, there are two grounding electrodes in the same plane, rotated 90 deg, to the sensing electrodes. The coil geometry creates a magnetic field which is uniform across the major diameter of the pipe in the plane of the electrodes. In doing so, important benifits are insured. |
First, external grounding rings are eliminated. Second, the entire process of measuring the average velocity is now forced to occur within the balanced electrode plane. Third, electrical noise is truly rejected. Since the magnetic field is uniform and the liquid is measured at the moment that it travels through the balanced electrode plane, the B.E.P. offers you more accurate measurment. Now you can have high accuracy and low cost. |
|  | Fluid temperature: -15 to 350 deg -26 to 177 deg C Ambient temperature: -15 to 140 deg F Note: If your process temperature and enviroment temperature are added together and exceeds 265 deg F, it is recommended that the transmitter be remotely mounted in an environment less than 140 deg F. | ||
| Accuracy:+/-0.5% of rate (std.) Suitable fluids:Liquids including slurries, abrasive or corrosive liquids with a minimum conductivity of 3uS/cm Frequency:Selectable 0 to 5,000 and 0 to 50 Hz or 0 to 10,000 and 0 to 100 Hz. 0-12vdc 50/50 duty cycle square wave. | Pressure: 275 psi at 100 deg F 190 psi at 350 deg F Mounting: Can be installed horizontally or vertically. Can be installed between elbows. No grounding rings required. Electrical Fittings:1/2" NPT Power required:120 or 240 vac 50 or 60 cycles | |||
The magnetic flowmeters consist of a metering flow tube and a transmitter. The transmitter is equipped with a 4-20mA output and four selectable frequency outputs of 0 to 5,000 and 0 to 50 Hz. or 0 to 10,000 and 0 to 100 Hz. these outputs may be used to interface with chart recorders, computers, or other instrumentation such as Hersey's rate indicator/totalizer/controllers. Local or remote rate indicator/totalizers are optional. | Output:40-20 mA (std) Material:
| System response time:0.1 sec. Enclosure:NEMA 4, 4X, 12, and 13 Electronics temperature: 140 deg F max. Display:Local or remote rate indication and totalization (optional) Warranty: Standard one year. |
Accessories | ||||
 |  |  |
||
| Local or Remote Rate Indicator/Resettable Totalizer Model 1000 | Remote Rate Indicator/ Resettable Totalizer Model 1150 | Rate Indicator/Totalizer/ Controllers Models 1030 and 3030 | ||
| Enclosuer: NEMA 4, 4X,12, and 13 Display:LCD, 0.43" high character Rate Indicator: 4 digits (5 Digits with added right zero), scalable from 0.001 to 9999. 5 position programmable decimal. Totalizer: 8 digits, scalable by 0.0001 to 100.0000 (scale factor of 0.0000=100.0000). 5 position programmable decimal. | Enclosure:Explosion-proof type Rate Indicator3.5 or 4.5 digits, 0.35" high character. Totalizer:8 digits, 0.2" high The 1150 is a two wire 4-20 mA loop powered indicator/totalizer. Easy to program with menu prompts. Calibration-high and low values are fully programmable through keypad. External pulse output. | Display:High visibility, 16 character, vacuum florescent display. Rate Indicator: 6 digits Totalizer:10 digit, scaled pulse output, remote reset capability for totalizer and set point outputs. It supplies 4 electronic outputs for driving lights, alarms, chart recorders, and totalization for remote operations. | ||
